The saw blade, which comes from the rear, is automatically positioned at the desired angle. The length stop pushes the profile to the desired measurement and automatically activates the cutting process. Depending on the profile, the angle cutting is carried out completely automatically and the leftover pieces are disposed of. The cutting lists are imported with measurement and angle inputs and called up via the touch screen control system or the barcode scanner.
|Function / |
|Saw blade diameter|
|Exenso length stop adjustment lenghts||6,000 mm|
|Accuracy||± 0.1 mm|
|Resolution||± 0.01 mm|
|Clamping system||pneumatic, vertical and / or horizontal|
|Monitor||15" touch screen with Exenso Comfort operation|
The Exenso Sawing System HS 600 has a saw blade that comes from the rear, and it is used according to the profile requirement. The flexible material clamps and supports are optimised for the respective profiles. The user-friendly Exenso control system with touch screen enables job lists to be loaded or the manual input of measurements.
The combination of the horizontal mitre saw and a length stop as a sawing unit enables automated production and allows for increased productivity. Angle corrections are automatically calculated in the Exenso Comfort control system and due to the optimisation, waste is reduced.